Cub Cadet SC2400 Checking the Safety Interlock System, Power Take Off PTO Safety Switch, 14-11

14. PERIODIC SERVICE

■Checking the Safety Interlock System

CAUTION

To avoid personal injury, do as follows:

●Read the “Safety Precautions” at the head of this manual.

●Read the danger, warning and caution statements on the safety-alert symbols on the tractor.

●To avoid possible poisoning from exhaust fumes, NEVER operate the engine in an enclosed place that lacks adequate ventilation.

●NEVER start the engine while standing on the ground. ALWAYS start the engine from the operator’s seat.

●Before starting the engine, ALWAYS set the forward and reverse drive pedal to the “NEUTRAL” position and the Power Take Off (PTO) switch to the “OFF” position.

Check the following points to be sure that the machine is in the normal state and ready to start.

If a fault is detected on the machine, do not operate the machine and contact your local Cub Cadet Yanmar dealer for technical assistance.

Before checking the safety interlock system, perform the following procedure.

1.Sit on the operator's seat.

2.Park the tractor safely on a solid, flat, level ground.

3.Engage the parking brake securely.

4.Turn off the Power Take Off (PTO) switch.

5.Set the forward and reverse drive pedal to the NEUTRAL position.

6.Stop the engine.

1. Power Take Off (PTO) Safety Switch

1.Pull up the Power Take Off (PTO) switch to set it to the ON position.

2.Turn the key to the START position.

3.Make sure that the starter motor does not crank.

4.Turn the key to the OFF position.

5.Push in the Power Take Off (PTO) switch to set it to the OFF position.

6.Turn the key to the START position.

7.Make sure that the starter motor starts running.

(A)Power Take Off (PTO) switch

	(A)
	3014919c
14-11	Sc2400 Operator’s Manual