Topfield TF 6000 FE manual From another digital receiver via RS-232 port

52 Firmware Update

7.3From another digital receiver via RS-232 port

It is possible to transfer the firmware from the digital receiver to another same digital receiver by connecting them with a RS- 232 cable. To update the firmware with this method, perform the following steps:

1.Turn off the target digital receiver.

2.Plug one end of a RS-232 cable (9 pin D-

sub cable) into the RS-232 port on the digital receiver, and the other end into the matching port on the other digital re- ceiver.

3.Turn on the source digital receiver if not already on.

4.Select the Installation > Transfer Firmware to Other IRD menu, then you get asked for confirmation; select Yes.

5.Turn on the target digital receiver to start the firmware transfer.

6.A progress bar appears showing the progress of the firmware transfer.

7.Restart the target digital receiver when the firmware transfer is complete.