74 Topfield Application Program
To run a TAP in the digital receiver, perform the following steps:
1.Press the 
button and then the 
or 
button to display the program file list.
2.Place the highlight bar on a file entry you want to run.
3.Press the OK button to start the program.
4.To exit the program, press the EXIT button.
The figure on the left is a run- ning screen of a TAP, Image Viewer, which displays image files of BMP, GIF and JPG for- mat. This TAP is available from the web site, http://www.
In the program file list, you can use a variety of file control functions including: renaming, sorting, deleting and so on. For detailed descriptions about the file control functions, refer to
§7.2.
If you want a program to run automatically when the digital
receiver starts up, move the program to the Auto Start folder. Press the 0 button at
