76 FirmwareUpdate
NOTE
Youcan only update with firmwares of which system identifi-
cationis identical to that of yours. Otherwiseyou will fail in
firmwareupdate.
10.2 From the network via LAN port
Youcan get a new firmware from the network via LAN port.
Selectthe Installation
>
LANSet-
ting>IP Configurationmenu.
Youshould see a screen like the
leftfigure.
Youmay assign a dynamic IP ad-
dress to the digital receiver. To
do so, set the DHCP option to
On.
Ifyou have a static IP address, set the DHCP option to Off, then
the IP Address,Subnet Mask and Gateway options become
enabled. You have to set these options according to your IP
address.

10.2.1 Automatic firmware update via LAN port

Toupdate the firmware automatically, follow the steps below:
1. Plug a LAN calbe into the LAN port on the digital receiver.
2. Select the Installation >LAN Settingmenu.
3.
Setthe Auto LAN Firmware Upgrade option to On, then turn
offthe digital receiver.