Topfield TF 600 PVRc 2.5 Switching on for the rst time

2.5Switching on for the ﬁrst time 15

To enjoy Dolby digital audio, your televi-

sionor audio system must be able to decode

Dolby digital audio, and you will need to

obtain a S/PDIF cable. Plug one end of

thecable into the S/PDIF socket on the digi-

talreceiver, and plug the other end into the

matchingsocket on your audio system.

Thedigital receiver can also output video to another appliance

suchas a video cassette recorder or video receiver through an

auxiliarySCART connector.

You will need to obtain a SCARTcable to

usethe auxiliary SCART connector. Plug one

endof the cable into the VCR socket on the

digitalreceiver, and plug the other end into

the matching socket on your video cassette

recorderor suchlike.

2.5 Switching on for the ﬁrst time

Nowthat you have your digital receiver connected, you should

plugit in to a mains socket. Ensurethat your television set is

turnedon, so that you will be able to see the display from the

digitalreceiver.

Toinsert the batteries, open the battery compartment by remov-

ingthe lid, and then insert the batteries observing the polarity,

whichis marked on the base of the battery compartment.

Ifthe digital receiver no longer reacts properly to remote con-

trolcommands, the batteries may be ﬂat. Be sure to remove