SECTION III

OPERATING INSTRUCTIONS

3-1 General Safety

Only qualified people familiar with this operator’s manual and the ZT operator’s manual should operate this machine.

3-2 Operation

A. Perform BEFORE EACH USE maintenance list in paragraph 4-1.

B. Start the engine/blower/blade assembly. B. Start ZT mower.

C. With the ZT mower at high idle speed, engage the cutter deck.

D. Proceed to operate the control levers of the ZT.

NOTE: If the collection system does not appear to be collecting the grass clippings; Disengage the deck, turn off the engine/blower/blade assembly and check the upper hose, lower hose, top screen, and boot for clogs.

3-3 Unloading The Collection System

NOTE: Press the tab, located behind the operator’s left side, downward to feel if the collection system is full. If the container is full there will be resistance when depressing the tab.

A. Stop the forward movement of the ZT mower. B. Disengage the cutter deck.

C. Using the throttle cable slow the engine down to idle. D. Push the dump handle, on the left of the operator, away from the unit. While holding the handle pushed away, move the handle upward. The container door will swing upward and the container will rotate downward. The container will release it’s contents.

E. Once the contents of the container have fallen out, the container is ready to move back into it’s normal operating position. With the handle in the ‘away’ position, pull the handle downward until it stops. Move the handle towards the center of the mower. This motion will allow the latch to lock back into collection position.

NOTE: If you do not hold the handle away from the mower as you pull the handle downward, the latch will not lock and the container can unexpectedly release the contents collected.

SECTION IV

MAINTENANCE

4-1 Maintenance Checklist

Before each use:

1.Check blades and spindles to be sure that no foreign objects, such as wire or steel strapping bands, are wrapped around them.

2.Inspect blades for wear. Replace if necessary. If it is necessary to sharpen the blades, remove the blades from the spindles before sharpening. DO NOT sharpen blades while still attached to the mower.

3.Make sure all shields are in place and in good condition. Repair or replace any missing or damaged shields.

4.Listen for abnormal sounds, which might indicate loose parts, damaged bearings, or other damage. Correct any deficiency before continuing operation.

5.Check for wear or deterioration of the upper or lower hoses. If there are any portions of the hose that have been torn or worn through, replace with genuine PeCo parts.

After Each Use:

1.Clean all debris from machine especially from the container, and off of safety decals. Replace any missing or illegible decals

2.Inspect unit for worn or damaged components. Repair or replace before the next use. Any replacement component installed during repair shall include the components current safety decal specified by the manufacturers to be affixed to the component.

11

Page 10 Page 12
Page 11
Image 11
Toro 22621223-24 manual Section Operating Instructions, Section Maintenance
Page 10 Page 12

22621223-24 specifications

The Toro 22621223-24 is a high-performance lawn mower designed for professional landscapers and homeowners seeking to maintain a pristine lawn. This equipment stands out due to its powerful engine, durable construction, and innovative features aimed at enhancing efficiency and ease of use.

At the heart of the Toro 22621223-24 is a reliable engine that delivers robust power for a smooth mowing experience. Its cutting-edge design ensures optimal fuel efficiency, allowing users to cover large areas without frequent refueling. This feature is particularly advantageous for professional landscapers tasked with maintaining extensive landscapes.

One of the standout characteristics of the Toro 22621223-24 is its adjustable cutting height. Users can easily customize the height of the mower blades, allowing for flexible maintenance that suits different grass types and growing conditions. This adaptability ensures that every lawn can be maintained to perfection, enhancing its overall appearance and health.

The mower also features Toro’s patented Recycler technology, which finely chops grass clippings and returns them to the lawn as nutrient-rich mulch. This process not only saves time—eliminating the need for bagging—but also contributes to healthier grass by naturally fertilizing the lawn. The Recycler functionality underscores the environmentally friendly design of the 22621223-24.

In terms of maneuverability, the Toro 22621223-24 is equipped with an ergonomic handle that provides comfort during extended use. The adjustable handle allows operators of varying heights to find a suitable position, reducing fatigue and increasing productivity. The mower’s lightweight design further enhances its ease of movement, ensuring that tackling tight spaces and navigating around obstacles is hassle-free.

Durability is another significant aspect of the Toro 22621223-24. The mower is constructed with high-quality materials that withstand the rigors of regular use, ensuring longevity and reliability. Its sturdy build comes with a rust-resistant deck, providing added protection against the elements.

In conclusion, the Toro 22621223-24 combines power, efficiency, and innovative technology, making it a top pick for those looking to achieve professional-quality lawn care. With features like adjustable cutting height, Recycler technology, and a user-friendly design, this mower offers an outstanding balance of performance and convenience, ensuring that maintaining a beautiful lawn is both effortless and enjoyable.
Top Page Image Contents