Manual Operation
Manual operation enables the automatic watering pro- grams or selected zones assigned to the program to be started manually. During operation, temporary changes can be made to increase or decrease the zone run time, step through the zone sequence and pause or stop watering using the “Watering Control Features” described on page 32. Upon completion of the manual watering operation, the timer will return to the Automatic mode.
Starting Programs and/or Zones Manually
You may operate all zones or selected zones in each pro- gram. Watering programs can be started individually or set to start in order. When one program finishes the next selected program will operate.
Ensure the control dial is in the run position.
Position the programs switch to select the program you wish to start.
Choose one of the following manual operations:
•To operate the selected program with all assigned zones, press the manual start button two times to begin watering.
•To operate only selected zones, press the manual start button, then press the +/on button to select the flashing zone number, or press the
Flashing |
Flashing |
1 |
3 |
3 |
3 |
Example: Program A is operating. Zone 1 is on and has 10 minutes of run time remaining.
Program B will start when program A is finished.
4.To select additional programs, repeat steps and. Note: Additional programs set to start will operate one at a time in alphabetical order. Each program letter will be displayed as it is selected. The program currently operating is indicated by the flashing pro- gram letter.
31