Toro ECXTRA manual Service and Specifications, Clearing the Program Memory

 Service and Specifications

 Clearing the Program Memory

Once programmed, the ECXTRA memory will be retained for several years with or without power. Only the current time and date information will be lost and will need to be reset if power is disconnected for more than 24 hours.

The programmable memory can be cleared and reset to

the default settings of individual programs or all pro-

grams simultaneously. (Refer the the default settings listed on page 21.)

IMPORTANT: This procedure permanently erases the pro- grammable watering information and can not be automati- cally restored once the procedure has been completed.

To clear the memory of a selected program (Example 1):

Turn the control dial to the season adjust position.

Check the programs switch setting. If necessary, reposition the switch to select the desired program. Press the next button to access the clear memory feature; CL will be displayed and begin flashing. Press and hold the –/offbutton until CL stops flashing (approximately five seconds). The memory will be cleared to the default settings.

5.To clear the memory of another program, repeat all of the steps starting at step .

36 Return the control dial to the run position.

Example 1

Example 2

To clear the memory of all programs (Example 2):

Turn the control dial to the off position.

Press the next button to access the clear memory feature; CL will be displayed and begin flashing. Press and hold the –/offbutton until CL stops flashing (approximately five seconds). The memory will be cleared to the default settings.

Return the control dial to the run position.