Radio Calibration Test

The radio calibration test enables the LTC to generate three different radio test patterns for use in radio network communications setup. If a radio is not connected, no indication is seen on the TM. The test patterns can be monitored by connecting an oscilloscope or headphones to the modem 2-wire connector.

To Perform Radio Calibration Test:

1.Turn off power to controller at power supply switch.

2.Press and hold key while switching on the power. Continue holding down the key for 5 seconds. The left display will show CAL.

3.Wait 30 seconds

•Press

•Press

•Press

4.Press

– A 1200 Hz test pattern will be generated for 30 seconds.

– A 2200 Hz test pattern will be generated for 30 seconds.

ENTER

– An alternating 1200/2200 Hz test pattern will be generated for 30 seconds.

START

EXIT

to exit Radio Calibration Test mode.

STOP

Link Monitor

Link Monitor enables any satellite communicating with the central to review the communications link status of all satellites within the network. During Link Monitor operation, the central continuously polls the network satellites in numerical sequence and rapidly displays the addresses accompanied by an audible “beep”. If a satellite does not respond to the central during the polling process, the satellite address remains displayed for two seconds and is accompanied by two additional beeps. After all satellites have been polled, the last satellite address in numerical sequence remains displayed for ten seconds. The polling sequence is repeated continuously until the Link Monitor is exited by pressing the Exit/Stop key.

1.Press and hold down the key for five seconds to activate Link Monitor mode.

Note: If this satellite is not connected to the network or if the LCM is not polling, 00 000 will be displayed.

EXIT

2.Press the key to exit the Link Monitor mode.

STOP

Group #

 

Satellite #

 

 

 

 

 

 

 

 

 

 

15

Page 14 Page 16
Page 15
Image 15
Toro Plus Series Satellite specifications Link Monitor, To Perform Radio Calibration Test, Wait 30 seconds
Page 14 Page 16

Plus Series Satellite specifications

The Toro Plus Series Satellite is a cutting-edge irrigation controller that combines advanced technology with user-friendly features to enhance landscape management. Designed for professional and residential use, this series caters to a variety of watering needs, ensuring optimal performance while promoting water conservation.

One of the standout features of the Toro Plus Series Satellite is its intuitive programming interface. With a user-friendly display, users can easily navigate through various settings, customize irrigation schedules, and monitor system performance. This interface is designed to simplify the setup process, allowing users to program multiple zones tailored to the unique needs of different landscape areas.

The Toro Plus Series Satellite incorporates advanced weather data integration, giving it the capability to adjust watering schedules based on real-time environmental conditions. By utilizing local weather data, this intelligent system can prevent overwatering during rainy days or adjust schedules during drought conditions, thereby conserving water and promoting healthy plants.

An important characteristic of the Toro Plus Series is its precision irrigation technology. This feature utilizes advanced sensor technology to monitor soil moisture levels, ensuring that each zone receives the precise amount of water needed. By minimizing water waste and reducing runoff, the Toro Plus series significantly contributes to sustainable gardening practices.

Connectivity is another major aspect of the Toro Plus Series Satellite. With capabilities for remote access via smartphone applications, users can easily manage their irrigation systems from anywhere. This feature allows homeowners and landscape professionals to adjust settings, view system status, and receive alerts, further enhancing convenience and control.

Additionally, the Toro Plus Series is built with durability in mind. Constructed from robust materials, it is designed to withstand harsh weather conditions and ensure long-lasting performance. Its modular design allows for easy upgrades and expansions, making it a versatile choice for growing landscapes.

In summary, the Toro Plus Series Satellite combines advanced programming capabilities, weather integration, precision irrigation technology, and remote connectivity, all housed in a durable and user-friendly design. These features build an efficient irrigation solution that not only meets the demands of any landscape but also champions water conservation and sustainable practices. This makes the Toro Plus Series an ideal choice for anyone looking to enhance their irrigation efficiency while caring for their green spaces.
Top Page Image Contents