Toro Plus Series Satellite specifications Set Program Repeat and Soak

Set Program Repeat and Soak

This is an optional programming feature which enables a program to repeat its operating cycle from 0 – 3 times (in addition to its initial cycle). A soak-in period from 0 – 59 minutes is placed between repeat cycles.

1. Press as needed to select the Program indicator.

Program No. Station No.

2.	Press	or	until the desired program number (1 – 16) is
	flashing.
3.	Press	– 01 will begin flashing.
4.	Press	– The letter "r" (repeat) will begin flashing.
5.	Press	– The digit left of colon in the right side display will
	begin flashing.
6.	Press	or	to display desired number of repeats (0 – 3).
7.	Press	– The digits right of colon will begin flashing.
8.	Press	or	to select a soak time (0 – 59 minutes).

Example Shown: Program 1, 2 repeat cycles with a 10-minute soak time between cycles.

ENTER

9.Press to enter information into controller memory.

START

:

:

Repeat

:

Program 1

No. of Repeats

:

:

:

2 Repeats

10minutes Soak Time

10.Press – The Program number will begin flashing.

11.Repeat steps 2 – 10 for all programs as required.

Note: During the soak period between watering cycles, the displays will alternate between Time/Day and Repeat/Soak status.

: AM

:

Program No.

Fr

:

Repeats

Remaining

Soak Time

Remaining

9