Toshiba 1600EP specifications 3.6, 6.0, 8.0, 10.0, 14.0, 18.0, 22 kVA

1600EP Single Phase Uninterruptible Power Supply Systems Guide Specifications

3.6, 6.0, 8.0, 10.0, 14.0, 18.0, 22 kVA

9.0Dimensions

	3.6 kVA	6.0 kVA	8.0 - 10 kVA	14 - 22kVA
Weight	322 lbs	346 lbs	476 lbs	784 lbs
Depth	28”	28”	28”	39"
Width	10”	10”	13”	18"
Height	33”	33”	34”	35"

Casters and leveling feet are standard

10.0Communications

10.1Dry Contact Communication

The remote interface is a standard feature. Signals are available through a DB9 male connector.

1)AC input present

2)Battery operation

3)Inverter

4)Bypass active

5)Fault

6)Loss of utility

10.2RS-232C Communication

The RS-232C serial communication interface is available through a DB9 female connector. The interface allows control of the UPS from a personal computer running special Toshiba software.

10.3EPO Control

The UPS shall come with terminals on its rear side for receiving an Emergency Power Off (EPO) and Remote Run/Stop command from a remote locations.

11.0Reliability

Demonstrated mean time between failures (MTBF) of 200,000 hours.

12.0 Environment Operation
Operating Ambient Temperature:		0 ~ 40oC (32 ~ 104oF)
Recommended Temperature:	+15oC ~ 25oC
Storage Temperature:	-20oC ~ 40oC
Humidity:	30-90%, Non-Condensing
Audible Noise:	50dB (A) maximum @ 1 meter from Front Panel

Page 6 of 8