Toshiba 1600EP specifications 3.6, 6.0, 8.0, 10.0, 14.0, 18.0, 22 kVA

1600EP Single Phase Uninterruptible Power Supply Systems Guide Specifications

3.6, 6.0, 8.0, 10.0, 14.0, 18.0, 22 kVA

Altitude: 3300 ft (1,000 m) above sea level

13.0Conformance

UL, CUL, ISO 9001, NEMA/PEI-1993

14.0Warranty

Toshiba Standard warranty includes 3 Years of on site service which covers electronics and labor, and a 5 year warranty on the batteries (2 years full, 3 years pro-rated)

15.0Options

15.1 Matching Battery Cabinets

Toshiba UPS offers two matching battery cabinets. Battery runtime may vary based upon: environmental conditions and percentage of load.

kVA	Battery Cabinet	Additional Runtime
3.6	UE31-BC-0650	70 minutes
6.0	UE31-BC-0650	50 minutes
8.0	UE31-BC-1825	75 minutes
10.0	UE31-BC-1825	50 minutes
14.0	UE31-BC-1825	35 minutes
18.0	UE31-BC-1825	25 minutes
22.0	UE31-BC-1825	15 minutes

15.2Line Cords & Receptacle Panels

To meet diverse electrical distribution requirements, Toshiba provides a wide variety of line cords and receptacle panels to connect various loads to the UPS System.

Line Cord
kVA	Line Cord	Description

3.6UE31-6LC-30A L6-30 Plug with 8" Input Line Cord (3 wire)

6.0UE31-6LC-50A L6-50 Plug with 8" Input Line Cord (3 wire)

8.0UE31-8LC-50A L6-50 Plug with 8" Input Line Cord (3 wire)

Receptacles Panel
kVA	Receptacles	Description
3.6 ~ 6.0	UE3-RP-B3	Four L6-30R, Two 5-15R (Duplex)
3.6 ~ 6.0	UE3-RP-B5	Five 5-20R (Duplex)
3.6~ 6.0	UE3-RP-B7	Two L6-30R, Four 5-15R (Duplex)
8.0	UE3-RP-C5	Five 5-20R (Duplex)
8.0	UE3-RP-C7	Two L6-30R, Four 5-15R (Duplex)

15.3UPS Built-in Maintenance Bypass

Every Toshiba UPS system includes a thyristor static bypass switch. For applications that require complete isolation of input and output power from UPS system, to allow service personnel to perform routine maintenance and testing without power interruption

Page 7 of 8