
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1800 Series
COOLING MODULE REMOVAL | CPU REMOVAL |
| Flat head |
| screwdriver |
| Cooling |
| module |
| Fan cable |
| CPU |
| PJ770 |
| lock |
| CPU |
M2x16 brass screws | Silicone grease |
3.Remove four M2x16 brass screws securing the cooling module.
4.Disconnect the fan cable from PJ770 from the system board and lift out the Fan module.
5.Slide the CPU lock in the direction of the arrow.
6.Insert a 5mm flat head screwdriver on the top side of the CPU socket and push the socket in the direction of the arrow and lift out the CPU.
NOTE: When installing the CPU make sure that a silicone grease is applied before attaching the cooling module. Please refer to
CD-ROM/DVD ROM DRIVE REMOVAL
M2x5.5 silver screws
| Brass washers |
drive |
|
| |
bracket | M2x2 silver screws |
|
.
1. | Remove two M2x5.5 silver screws securing the | 3. Remove two M2x2 silver screws and two brass |
| DVD ROM drive. | washers securing the CD/DVD- ROM drive bracket. |
2. | Slide the |
|
| it from PJ321 on the system board. |
|
TOSHIBA
Tough Enough for Today’s World