Analogue Tuning and programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
When TV (Analogue TV) is selected for the first time; the A.P.S. screen will appear.
Auto. Programming System
Language | English |
Country | UK |
Teletext region | West Europe |
Check the antenna cable | |
Start: Ok | Exit: Exit |
Use the Up or Down button to highlight the Language, Country and Teletext region items. Press the Left or Right button to adjust the highlighted item. Then press the OK button to start tuning.
The television will start to search for available stations.
Auto. Programming System
APS is running: 78%
You must allow the television to complete the search.
When the search is complete the television will automati- cally select programme position 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using program table which will appear on the screen.
P01
Program Table
P01 | BBC 1 | P11 |
P02 | C 04 | P12 |
P03 |
| P13 |
P04 |
| P14 |
P05 |
| P15 |
P06 |
| P16 |
P07 |
| P17 |
P08 |
| P18 |
P09 |
| P19 |
P10 |
| P20 |
Delete | Move | |
Name | A.P.S | |
Exit: Exit
With the list of stations now showing use the Up or Down button to highlight the station you want to move and press the GREEN button.
Use the Up or Down button to move through the list to
the preferred position, as you do so the other stations will move to make room, then press the GREEN button again. The selected station will be moved to the new position.
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media re- corder/decoder with a SCART lead or if a station on another system is required, a programme position can be manually tuned in (see page 11).
Exit: Exit
English - 10 -
