English - 7 -
Connections and controls
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the
top of the television may be used for some functions.

Switching on

If the standby LED is unlit, connect the mains plug to
the mains outlet. Press the Power button to switch the
television into standby. The blue LED will light.
To view the television, press or any of the number
buttons on the remote control, or the P+ / P- buttons on
the TV. The blue LED will turn off and the picture will
appear after a few seconds.
To put the televisio n into standby, press on the
remote control, the blue LED will light.

Using the remote control

Press the MENU button on the remote control to see the
menus.
In TV mode the menu appears as a group of icons each
for a menu option. Press the Up or Down button to
select a topic.
To use the options press the Right or OKbuttons on the
remote control to select. Use the Up and Down buttons
to select the required choice. Follow the on screen in-
structions. The functions of each menu are described in
detail throughout the manual.

Using the controls and connections

Using the control buttons on the top of the TV:
• To alter the volume press .
• To alter the programme position press on the top
of the TV.
• Press MENU and and to control the
menu options.
• Press MENU to finish.
When connecting mono sound equipment to EXT2 (BACK-
AV), connect the audio output of the equipment to the L or
R socket on the television, then press select Dual
I for the left mono, Dual II for the right mono, or stereo for
mono through both left and right speakers.
To select the Input, press until EXT2 is highlighted in
SOURCE menu as described onpage 23. The television
will automatically sense the type of signal.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
LED
Blue = Standby
TV/AV
MENU POWER
ON/OFF
PROGRAMME
UP / DOWN
VOLUME
UP / DOWN

HEADPHONE

JACK

P/CH
MENU
TV/AV