Toshiba 20HL85 appendix Adding channels to the TV’s memory, Programming channels automatically

Adding channels to the TV’s memory

When you press CH 3 or 4, your TV will stop only on the channels you have stored in the TV’s channel memory. Follow the steps below to program channels into the channel memory.

INPUT DISPLAY

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:

1. Press TV to select the TV mode.

2.Press MENU, then press or to display the SETUP menu.

3.Press ▲ or ▼ until the TV/CABLE

	selection is highlighted.
4.	Press	or to highlight either	S E T U P
			L A N G U A G E	ENGLISH
	TV or CABLE, depending on
			CLOCK SET	12:00AM
	which you use.		TV / CABLE	TV /	CABLE
			CH PROGRAM
			ADD / ERASE	ADD
	If you use an antenna, choose TV.		:SELECT	:ADJUST
	If you use cable, choose CABLE.
5.	Press ▼ until the CH PROGRAM selection is highlighted.
6.	Press	to start channel programming. The TV will automatically
	cycle through all the TV or Cable channels (depending on which you
	selected), and store all active channels in the channel memory.
	While the TV is cycling through the channels, the message
	“PROGRAMMING NOW-PLEASE WAIT” appears.
7.	When channel programming is complete, the message “COMPLETED”
	appears.
8.	Press CH 3 or 4 to view the programmed channels.

Channel

Numbers

TV

Channel 3 4

Menu

Introduction

Connecting your TV

Setting

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Press TV to select the TV mode.

2.Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons.

3.Press MENU, then press or to

	display the SETUP menu.
4.	Press ▲ or ▼ to highlight ADD/	SETUP
	ERASE.	LANGUAGE	ENGLISH
		CLOCK SET	12:00AM
5.	Press or to select ADD or	TV / CABLE	CABLE
		CH PROGRAM
		ADD / ERASE	ADD	/ ERASE
	ERASE, whichever function you	:SELECT	:ADJUST
	want to perform.
6.	Repeat steps 1-5 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel 3 / 4 on the TV or CH 3 / 4 on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5.

CT-885

In addition to cycling through your programmed channels, the Channel 3 / 4 buttons will also cycle through the video input sources (page 30) in the order illustrated below.

ANT (programmed channel)		VIDEO1	VIDEO2
PC	HDMI	ColorStream HD

Note:

If the remote control does not operate your TV, press the “TV” button on the remote control and try again.

up your TV

Using the TV’s Features

Appendix

23

J3U70101C(E)P17-24 23 15/06/2005, 4:11 PM