Using the TV’s Features
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off. The clock will increase 10 minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m). After the sleep timer is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Using the closed caption feature
The Closed Caption feature has two options:
•
•
To view captions or text:
1.Press TV to select the TV mode.
2.Tune the TV to the desired program.
3.Press MENU, then press 
or 
to display the SETUP menu.
4.Press ▲ or ▼ to highlight CLOSED CAPTION.
|
|
|
|
|
|
|
|
|
| S E T U P |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLOSED CAPTION |
| OFF |
|
|
|
|
|
| C1 / C2 / T1 / T2 / | OFF |
| ||
|
| PICTURE SIZE |
| FILM | |||
|
| CINEMA MODE |
| ||||
|
| ASPECT |
| ON | |||
|
| BACK LIGHTING | 16 |
|
|
| |
|
| :SELECT |
| :ADJUST | |||
|
|
|
|
|
|
|
|
5.Press 
or 
to select the desired Closed Caption mode, as follows:
•To view captions, select C1 or C2 (C1 displays translation of the primary language in your area).
Note: If the program or video you selected is not closed- captioned, no captions will display
•To view text, select T1 or T2. Note: If text is not available in your viewing area, a black rectangle may appear
•To turn the Closed Caption feature off, highlight OFF in the Closed Caption menu.
INPUT DISPLAY
TV
Menu
Sleep
Note:
A closed caption signal may not be decoded in the following situations:
•when a video tape has been dubbed
•when the signal reception is weak
•when the signal reception is
Note:
If the remote control does not operate your TV, press the “TV” button on the remote control and try again.
34
34 | 15/06/2005, 4:12 PM |
