Toshiba 26HL84 Connecting a VCR, Connecting a cable converter box, Introduction, yourTV, Usingthe

Connecting a VCR

This connection allows you to watch local channels and video programs, watch video tapes, and record one channel while watching another channel.

You will need:

¥two coaxial cables

¥one set of standard A/V cables

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable instead of the standard video cable.

E

F

S

Introduction

	From Cable Box or Antenna
Stereo VCR
	VIDEO	AUDIO
		L	R
IN from ANT	OUT to TV		IN
CH 3			OUT
CH 4

TV

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Connecting	yourTV
Usingthe	RemoteControl

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To use the TVÕs features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

¥ three coaxial cables

From Cable

TV

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

Settingup	yourTV
UsingtheTVÕs	Features

OUT

Cable converter box

IN

Appendix

Index

9