Toshiba 26HL84, 32HL84 owner manual DTV Antenna

Connecting a DTV receiver/set-top box with ColorStream¨ (component video) and a VCR

This connection allows you to watch DTV (digital TV broadcast), VCR, and TV programs, and record DTV and TV programs. You can record from one source while watching a program from another source.

Your TV has ColorStream¨ (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

You will need:

¥three coaxial cables

¥two sets of standard A/V cables

¥one set of component video cables

¥one pair of standard audio cables

From

Antenna Stereo VCR

VIDEO AUDIO
L	R
IN from ANT OUT to TV	IN
CH 3	OUT
CH 4

TV
From		AUDIO
DTV Antenna	L	OUT
		L	PB	Y
	Satelite IN	PR

R	R	VIDEO S-VIDEO COMPONENT VIDEO
		OUT

DTV receiver with component video

Note:

For the highest possible picture quality, use component video cables (or a DVI-D digital single-link cable) between the TV and DTV receiver.

You can connect component video cables from the DTV receiver to either set of ColorStream terminals on the TV (HD-1 or HD-2).

The ColorStream HD-1 and HD-2 terminals can be used with Progressive (480p, 720p) and Interlaced (480i,1080i) scan systems.

If your DTV receiver is not compatible

with component video (or DVI/HDCP), use an S-video cable (plus an audio connection) instead.

To record from the DTV receiver, set the VCR to Line IN. To monitor recording from the DTV receiver, set the VCR to Line IN and the TV to VIDEO 1.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

E

F

S

Introduction
Connecting	yourTV
Usingthe	RemoteControl
Settingup	yourTV
UsingtheTVÕs	Features
Appendix

13

Index