Toshiba 26HL84, 32HL84 owner manual Connecting two VCRs, Connecting a camcorder

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record one channel while watching another channel.

You will need:

¥two coaxial cables

¥two sets of standard A/V cables

	VCR1
From	VIDEO AUDIO
	L R
	IN
Antenna
	IN from ANT OUT to TV

CH 3

Note:

If you have VCRs with S-video, use S-video cables instead of standard video cables. Do not connect both a standard video cable and an S-video cable to VIDEO 1 (or VIDEO 2) at the same time, or the picture performance will be unacceptable.

Do not connect the same VCR to the output and input terminals on the TV at the same time.

To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1.

CH 4

OUT

Connecting	yourTV
	TV

VCR2	*	**
	VIDEO	AUDIO
		L	R
			IN
CH 3			OUT
CH 4

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

¥ one set of standard A/V cables

Camcorder

VIDEO AUDIO

OUT

L

R

Video-3 (Side panel)

*The Video OUT terminals does not output the POP picture.

**The Audio OUT terminals can output the sound of either the Main or POP picture (see “Selecting the Audio OUT sound” on page 58).

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

If you have a camcorder with S-video, use an S-video cable instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

14