Toshiba 37WL58A, 32WL58T, 32WL58A To connect an Hdmi and a DVI device, To connect an Hdmi device

Equipment connections

Connecting an HDMI and a DVI device

¥This TV is not intended for connection to and should not be used with a PC.

¥When turnning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

¥When turnning off your electronic components, turn off the HDMI and DVI device first, and then the TV.

¥Before connecting an HDMI and a DVI device, remove the back terminal covers (see page 10).

¥This model may not be compatible with features and/or specifications that may be added in the future.

To connect an HDMI and a DVI device

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device and uncompressed digital video from a DVI device.

This input is designed to accept HDCP program material in digital from EIA/CEA-861/861B compliant consumer electronic devices (such as a set top box and DVD player with HDMI and DVI output).

The HDMI input is designed for best performance with 1080i (50 Hz/60 Hz) high-definition video signals, but will also accept and display 480i, 480p, 576i, 576p and 720p (50 Hz) signals.

¥HDMI: High-Definition Multimedia Interface

¥DVI: Digital Video Interface

¥HDCP: High-bandwidth Digital Content Protection

¥EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

Equipment connections

To connect an HDMI device:

One HDMI cable (type A connector)

TV back view

HDMI device

VIDEO	AUDIO
	L	R	HDMI OUT

IN

OUT

For proper operation, it is recommended that you use a short HDMI cable.

HDMI cable transfers both video and audio. Separate analog audio cables are not required.

Some CDVs (video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables.

To connect a DVI device:

One HDMI (type A connector)-to-DVI adapter cable and audio cables

TV back view

DVI device

VIDEO	AUDIO		DVI
			OUT
	L	R
			IN
			OUT

HDMI (type A connector)-to-DVI adapter cable For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 3m. The recommended length is 2m.

Standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required.

¥HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing , LLC.

52

#01E47-52_32/37WL58AET 52 8/5/05, 3:59 PM

Black

Toshiba 32/37WL58AET (E)