Toshiba 34AS41 Set up, purple, TV/VIDEO, TV/VIDEO, Preparation, MENU T/S t/s, –For example:, Section Advanced, To stop the demo:, To start the demo:, displayed on-screen

Set up

Watching TV programs or videotapes

Preparation

Operation Basic Operation

CHANNEL t/s

TV / VIDEO VOLUME

CHANNEL

POWER

MENU T/S t/s

TV/VIDEO

		POWER	RECALL
RECALL	MUTE	POWER
RECALL	MUTE
	o
1	2	3
4	5	6	Channel
			Number
7	8	9
		CH RTN
100	0	ENT

Selecting a TV channelSelect a channel in one of the following two ways:●Scan through the programmed channels in numerical sequence:–Press CHANNEL s to select the next higher channel.–Press CHANNEL t to select the next lower channel.–Continue pressing CHANNEL s or t to select the next programmed channel.●Select a channel directly:–Press the Channel Number buttons (0–9 and 100).–For example:To select channel 4, press 0—4.To select channel 38, press 3—8.To select channel 125, press 100—2—5.

If you cannot select a specific channel, make sure the TV/CABLE function is set correctly (see page 16).

Selecting the video input source

You can use the TV/VIDEO button to view a signal coming from other video equipment connected to your TV (such as a VCR or DVD player). See “Connecting your TV” on page 5.

Note: To operate your video equipment properly, refer to the instructions provided with the video equipment.

Section Advanced

VOL MENU/ VOL

ENTER

CABLE

VCR EXIT

FAV CH TV/VIDEO

CHANNEL s/t

EXIT

TV/VIDEO

Turn the TV and video equipment on.

Press TV/VIDEO to select VIDEO 1 or VIDEO 2. The selected source will be displayed in purple.

VIDEO1

VIDEO2

TO SELECT PUSH TV/VIDEO

Reference

REC TV/VCR STOP PLAY

STILL SOURCE PIP

SLOW PAUSE REW FF

PIP CH LOCATE SWAP

3 Operate the video equipment normally.About the DEMO (demonstration) mode

When the DEMO mode is activated, your TV automatically displays a variety of its on-screen menus and special features. This function is provided for demonstration purposes only.

To start the demo:
1	Press MENU until the Option menu is	LANGUAGE:[ENGLISH]FRANCAIS
	displayed on-screen.		ESPANOL
2	Press s or t until DEMO is displayed in	DEMO:	[START]STOP
2	Press s or t until DEMO is displayed in	C.CAPT:	C1 C2 C3 C4 T1
	purple.		T2 T3 T4[OFF]
	purple.
3	Press T or S to select START. The on-	MOVE[t s] SELECT[T S]
	screen demo starts after about 15 seconds.
	screen demo starts after about 15 seconds.

To stop the demo:1 Press EXIT or RECALL on the Remote, or select STOP in the menu.