5 USING THE EDITING FUNCTIONS

196 JOB BUILD

JOB BUILD
This function allows you to copy different kinds of originals at one time.
Scanning is performed by setting the optimal original mode and image adjustment for each orig-
inal (it is called a job). After all the originals have finished being scanned, they can be copied at
one time.
Also, the original scanning source (Reversing Automatic Document Feeder or original glass) of
originals can be switched per job, and so, for example, after originals such as multiple LD texts,
news clips, photographs in magazines and multiple LT photographs with the appropriate settings
have finished being scanned, they can be copied in the scanned order in one go. And the
scanned data can be stored in e-Filing.
yUp to 1000 pages of originals are possible.
yAny number of jobs can be set until the total number of scanned original pages reaches
1000.
There are restrictions on the settings for JOB BUILD: Settings not available for JOB BUILD,
common settings which are set before scanning the first job and applied to all jobs, and change-
able settings for each job. See the following table to perform the setting.
Settings not available
for JOB BUILD
Common settings
for all jobs
Changeable settings
per each job
Automatic Paper Selection (APS)
Book to 2
Twin color copy
Image editing
XY zoom
Cover copying
Sheet insertion mode
Magazine sort
Magazine sort & Saddle stitch
2IN1 / 4IN1
Full image
Image repeat
e-Filing/file
Mixed-size original
Paper size to be copied
Sort mode
Image shift
Book center erase
Time stamp
Page number
Image direction in 2-sided
copying
Book <-> tablet
Photo zoom
Reproduction ratio
Automatic magnification selection
(Default setting for JOB BUILD)
Original size
Original mode
Color mode
1-sided -> 1-sided / 2-sided ->
1-sided (or 1-sided -> 2-sided /
2-sided -> 2-sided) copying
Background adjustment
Sharpness
Edge erase
Dual-page
ADF / SADF