Setting Originals 77

Continuous feed mode
When the number of originals is too large to be set at one time, you can previously divide
the originals into several sets to copy them continuously. To do so, place the first set of
the originals and press the [CONTINUE] button on the touch panel while the data of this
set are being scanned. When this scanning has finished, set the next set of the originals
and press the [START] button on the control panel.
1

Align all the originals. Then

place them face up and align

the side guides to the original

length.

yPlace the originals straight along the
side guides.
yCollate the originals in the order that
you want them to be copied. The top
sheet of the originals will be fed first.
yThis mode is also available for one-
sheet originals.
yRegardless of their sizes, originals
are acceptable up to 100 sheets (9.3
to 20 lb.) or 0.62" in height.
yFor mixed-size originals, see
P.105 “Copying mixed-sized originals
in one operation (mixed original
size)”.
yUse the original stopper as required.
yTo replace the original stopper, lift it
slightly and push it in.