Preparation 2- Setting Copy Paper 61
yPlace paper with its copy side up. (The copy side may be described on the wrapping
paper.)
yFor the maximum number of sheets that can be set, see P.57 “Acceptable copy
paper”.
yFan the paper well before placing it in the drawer.
yBe sure that the paper height does not exceed the line indicated inside of the guide.
yDo not use creased, folded, wrinkled or damp sheets of paper.
7
Place paper in the drawer(s).
Make sure that a gap of 0.02" (0.04" or less in
total) is left between the paper and the side
guide for plain paper, and approx. 0.02" to 0.04"
(approx. 0.04" to 0.08" in total) for thick paper. If
the gap is insufficient, it could cause paper mis-
feeding.
A