Toshiba 36AF12 owner manual Selecting the signal source, Programming channels into the TV’s memory

Selecting the signal source

To select the signal source to view:

Repeatedly press TV/VIDEO on either the remote control or the TV.

TV	VIDEO 1
VIDEO 1	VIDEO 2	ANT 1
VIDEO 2
	VIDEO 3
VIDEO 3
	ColorStream	ANT 2
ColorStream
TO SELECT PUSH TV/VIDEO	TO SELECT PUSH TV/VIDEO
Pressing TV/VIDEO	Pressing TV/VIDEO
on the remote control	on the TV

Channel

TV/Video

DEMO MENU TV/VIDEO VOLUME CHANNEL

POWER

Menu

Welcome to Toshiba

Connecting your TV

To display the current signal source:

Press RECALL.

Programming channels into the TV’s memory

When you press CHANNEL ▲▼ on the TV or remote control, the TV stops only on the channels stored in the TV’s memory.

Note: To tune the TV to a channel not programmed into the memory, use the CHANNEL NUMBERS on the remote control.

Follow the steps below and on the next page to program channels into the TV’s memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in the TV’s memory. After the channels are stored auto- matically, you can manually add or erase individual channels (see page 18).

If you use both ANT-1 and ANT-2 terminals, you will need to program channels for each signal source.

To program channels automatically:

1.Press MENU.

2.Press x or • to highlight the SET UP menu.

3.Press y or z to highlight TV/CABLE.

4.Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable).

5.Press z to highlight CH PROGRAM.

SET UP				SET UP
LANGUAGE:				LANGUAGE:
	[ENGLISH] FRANCAIS ESPANOL			[ENGLISH] FRANCAIS ESPANOL
ANT1/2:		[ANT1] ANT2		ANT1/2:		[ANT1] ANT2
TV/CABLE:		[TV] CABLE		TV/CABLE:		[TV] CABLE
CH PROGRAM				CH PROGRAM
ADD/ERASE:		[ADD] ERASE		ADD/ERASE:		[ADD] ERASE
MORE				MORE
MOVE [	]	SELECT [	]	MOVE [	]	SELECT [	]

6.Press x or • to start automatic channel programming (“CH PROGRAM” displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV’s memory.

7.When automatic channel programming is complete, the message “CH Programming Completed” appears.

8.Press CHANNEL ▲▼ to view the programmed channels.

LIGHT RECALL POWER

TV
CABLE	MUTE TV/VIDEO TIMER
VCR

1	2	3
			CH
4	5	6
7	8	9	VOL
		CH RTN
100	0	ENT
		ADV/
.CAPT	PIP CH		MENU
C
FAV	ENTER		FAV
RESET		ADV/	EXIT

PIP CH

TV/VIDEO

CH (Channel)

Channel

Numbers

MENU

Using the Remote Control

Setting up your TV

Using the TV’s Features

Appendix

Index

17