Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1.Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel.
2.Press MENU.
3.Press x or • to highlight the SET UP menu.
4.Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE:
Channel
DEMO MENU TV/VIDEO | VOLUME | CHANNEL |
POWER
Menu
up TV
[ENGLISH] FRANCAIS ESPANOL
ANT1/2: | [ANT1] ANT2 |
TV/CABLE: | [TV] CABLE |
CH PROGRAM |
|
ADD/ERASE: | [ADD] ERASE |
MORE |
|
MOVE [ | ] SELECT [ | ] |
5.Press x or • to select ADD or ERASE, whichever function you want to perform.
6.Press MENU.
7.Repeat steps
Changing channels
LIGHT RECALL POWER
TV |
| |
CABLE | MUTE TV/VIDEO TIMER | |
VCR | ||
|
1 | 2 | 3 |
|
|
|
| CH |
4 | 5 | 6 |
|
7 | 8 | 9 | VOL |
|
| CH RTN | |
|
|
| |
100 | 0 | ENT |
|
|
| ADV/ |
|
.CAPT | PIP CH | MENU | |
|
| ||
C |
|
|
|
CH (Channel) 
Channel
Numbers
MENU
Setting your
To change to the next programmed channel:
Press CHANNEL yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS
Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100, 0, 0; to select channel 125, press 100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1.Press MENU, and then press x or • until the SET UP menu appears.
2.Press y or z to highlight TILT CORRECTION.
3.Press x or • to adjust the picture tilt (from
SET UP
MORE
DEMO | [START] STOP |
|
|
| |
IMAGE TILT | +3 – |
|
| + | |
| |||||
MOVE [ | ] | SELECT [ | ] |
|
|
FAV 
ENTER 
FAV
RESET | ADV/ | EXIT | EXIT |
| |||
| PIP CH |
|
|
18
