15
Getting started
Manually setting channels in the channel
memory - analog only -
Use the Manual tuning operation if desired channels cannot be
preset with the Auto tuning or if you would like to preset
channels to specific position numbers one by one.
1From the SET UP menu, press or to select Manual
tuning.
2Press Q to display the Manual tuning menu.
Press or to select the program position you want to
arrange.
3Press Q to display the breakdown menu.
Press or to select an item, then press or to
select the item as shown below.
A. Program position selection
B. Sound system (- page 41)
C. Color system (- page 41)
A : Automatic (factory set), P : PAL, S : SECAM
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the color of a certain channel is abnormal, the
automatic color system selection (A) may have
malfunctioned, or sound system selection is wrong. In
such a case, select another color and/or sound system
(- page 41).
D. Program position skip selection
Press or to turn the program position skip option
on “8” or off “(”.
The program position will then be skipped when you
select channels with PU or Pu.
The “8” mark will appear beside a program position
number when you use the Number button on the
remote control.
E. Channel search operation
Press to search up the band or to search down the
band.
Press or repeatedly until your desired channel is
displayed.
When a station/satellite is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
F. Auto Fine Tuning
Press or to turn the Auto Fine Tuning option on
“9” or off “0”.
The Auto Fine Tuning function automatically corrects
slight fluctuations when receiving signals.
Manual Fine Tuning
While the Auto Fine Tuning turn off “0”, press or
so that the better picture and sound are obtained.
G.Label
Station labels appear under the program position
display each time you turn on the TV, select a channel,
or press k.
To change or create station labels:
1) Press or repeatedly to select a character for
the first space, then press .
2) Repeat step 1) to enter the rest of the characters. If
you would like a blank space in the label name, you
must choose a blank space from the list of
characters.
Press Q to store your settings.
5
4
3
2
1
MENU
BackWatch TV
EXIT
6
OK
Manual tuning
Prog. Label
SelectSort
ACE
BDF
G
MENU
BackWatch TV
EXIT
OK
Manual tuning
Store
1B/G
Program
A
*(blank space)