Toshiba 37X3000A, 46X3000A Timers, Setting the Time zone digital only, To delete a selected entry

Using the TV’s features (General)

The timers

Setting the Time zone - digital only -

This function allows you to manually set the time zone and override the location that you have chosen during Auto Scan. This is to be used when you move out of Australia to country with different time zone. Please note that if you manually change the time zone setting, all existing entries in the program timer will become invalid as they are still based on the old time zone. It is recommended that you delete all the entries in the program timer before proceeding with steps described below.

1From the PROFILE menu, press ￿ or ￿ to select Time zone.

2Press ￿ and ￿ to select the local time zone.

			DIGITAL SETTINGS
PROFILE
Audio Preference
Time Format		24 hr
Time zone	GMT +08:30
Transparency	70
I-Plate Display Time		1 sec
Back Select Function				Watch TV

Program Timer - digital only -

This function will set the TV to go to a specific channel at a certain time. It can be used to view a particular program, or by setting the mode to daily or weekly, can be used to view a series of programs.

1Press M, then ￿ or ￿ to select the PROGRAM menu.

2Press ￿ or ￿ to select Timer, then press Q.

		DIGITAL SETTINGS
PROGRAM
Channel List
Favorite Mode	On
Parental Rate	No Block
EPG
Timer
Alarm
Back Select Function			Watch TV

3Press ￿ or ￿ to select an empty slot to program a timer or any existing program to be edited, then press Q.

Timer

Tuesday, 11 Nov 2008 06:44

Ch. No. Channel Name		Mode		Date	Start	End
0006	Channel 5	Weekly-Sat	18	Nov 2008	20:30	21:00
0007	Channel News Asia	Daily	11	Nov 2008	00:00	00:00
0008	Channel 8	Daily	11	Nov 2008	00:00	00:00
0009	Channel U	Once	11	Nov 2008	00:00	00:00

Back Select Function Edit Timer Delete Watch TV

4Press ￿ and ￿ to select Ch. No. and ￿ or ￿ to choose the channel you want. Press ￿ and ￿to select Mode and ￿ or ￿ to choose Once, Daily or Weekly. Then use the Number buttons to set time for Date, Start and End in 24-hour format.

	Timer Setting
Ch.No.	0007
Name	Channel News Asia
Mode	Once
Date	11 Nov 2008
Start	13:00
End	14:00

Back Select Function Enter

5Press Q to save. If you have selected a locked channel or activated Parental Rate, enter password when prompted.

Note:

If the new entry causes a conflict with the existing entries (i.e. overlapping recording time), the new entry will not be saved.

To delete a selected entry:

Press the Red button, then use ￿ or ￿ to select Yes, then press Q (All fields will be cleared).

Notes:

•When a timed program is about to start, an information screen will appear indicating the change of current channel. The menus and other channels will not be available during the timed program unless the program timer is cancelled. When the program timer expires, the TV switches to the channel from which it is switched from.

•If timer action occurs when the TV is in standby, the TV will turn on but no picture is seen and no sound is heard. Selected digital channel will be at the AV OUTPUT terminals (- page 9). The selected channel can be watched or recorded via the AV OUTPUT terminals.

•When the timer table is empty, the DTV timer LED (- page

8)will be off. When the timer table contains at least one entry, the DTV timer LED will be set to red.

If timer action is in progress, the DTV timer LED will be changed from red to yellow.

•If Menu or EPG is still open when timer action is scheduled to start, the Menu or EPG will be closed automatically and then the timer will start.

•The correct operation of the Timer depends on the information received from Broadcaster’s stream.

The time, and the deletion of service are examples of such information. When broadcaster decides to delete any channel, the respective entries will then be deleted from the Timer-table.

It is not the malfunction of the TV.

24