Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.
SCART 3 (EXT 3)
SCART 1 (EXT 1)
SCART 2 (EXT 2)
the back of your television
☛ | * |
|
|
| could | |
a decoder |
| |||||
be Digital | Satellite, | |||||
| or any | |||||
Free to Air | ||||||
|
| |||||
other | compatible | |||||
. |
|
|
| |||
|
|
|
|
| ||
decoder |
|
|
| |||
decoder*
VCRIN
OUT
TELEVISION
IN
OUT
IN/OUTSAT
WE RECOMMEND THAT YOU USE SCART LEADS IN ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a video recorder it is essential that the aerial cable is connected through the decoder and/or through the video recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television. Connect the decoder television socket to the television. Connect the video recorder SAT socket to the decoder VCR socket.
Before running Auto tuning put your decoder and video recorder to Standby.
The phono sockets will accept L and R audio signals.
In addition there is a fixed/variable external audio output which enables the connection to a suitable
video recorder
A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.
We recommend SCART 1 for a decoder, SCART 2 for additional equipment (games console etc.) and SCART 3 for a VCR.
If connecting
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button.
To recall external equipment, press Bto select between EXT1, EXT2, EXT3, or EXT4.
6
