Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively press the external source selection button B until the picture from connected equipment is shown.
An S in the display e.g. B3S (EXT 3S), indicates the input is set for an
Input selection
Use the Input Selection if the television does not switch
over automatically.
1Press Bto select B1, B2, B3, or B4 (EXT
2To return to television mode press Bagain or one of the numbered buttons.
INPUT signal selection
This specifies the type of signal going into SCART 3 (EXT3) on the back of the television. Please refer to the manufacturers instructions for the connected equipment.
1In the SET UP menu press Q until
AV connection is highlighted, then press R. With S or R select either AV or
If the colour is missing try the alternative setting.
AV connection
EXT3 input | ▼ | AV | ▼ |
EXT3 output | ▼ | EXT1 | ▼ |
Woofer | ▼ | Int. | ▼ |
Audio output | ▼ | Fixed | ▼ |
OUTPUT signal selection for SCART 3
This enables selection of the source to output from SCART 3. For example, to record transmissions in stereo from a stereo decoder – connect a stereo decoder to SCART 1 and stereo VCR to SCART 3, then select EXT 1 as the EXT3 output. The signal received through SCART 1 will output directly through SCART 3.
1Select AV connection.
AV connection
EXT3 input | ▼ | AV | ▼ |
EXT3 output | ▼ | EXT1 | ▼ |
Woofer | ▼ | Int. | ▼ |
Audio output | ▼ | Fixed | ▼ |
EXIT :To exit
2Use Sor Rto change the EXT3 output option to:
Monitor = The picture on screen.
TV = The last television programme selection. EXT1 = The picture from equipment connected to SCART 1.
EXT2 = The picture from equipment connected to SCART 2.
EXT4 = The picture from equipment connected to the front/side input sockets.
EXIT :To exit
17
