12
General and sound controls,stereo/bilingual transmissionsVolume
Press

j

— (S)or

j

+ (R)to adjust the volume.
Sound Mute
Press konce to turn the sound off and again to cancel.
Bass Boost – to enhance the depth of sound
Press
nthen SorRto adjust the effect. The difference
will only be noticeable on sound with a strong bass. Press
nagain to turn Bass Boost off.
Super Woofer
When an active Super Woofer is connected (to the
Woofer Out connection on the back of the television)
pressing nwill control it only if Woofer Ext.is chosen.
Select AVconnection in the SET UP menu, press Q
until Woofer is highlighted then press SorRto choose
Ext.
To select a programme position use the numbered
buttons on the remote control.
For programme positions below10 use 0 and the
required number e.g.01 for programme position 1.
Programme positions can also be selected using Pf(P)
andPe(Q).
To revert to the previous programme position press ^^.
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL.
Selecting programme positions
Sound controls
Press MENUand Sor Rto select SOUND.
Press Qto highlight Bass,Treble or Balance
and SorRto change the setting.
When connecting to a Hi-fi unit, set the Speaker
option to Off. Then select Fixedor Variable for
the Audio outputin the AV connection menu.
Bass, Treble and Balance
1
2
SOUND
Bass + 8
Treble 0
Balance 0
Speaker On
EXIT :To exit

If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press OI/IIto select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dualwill display. Choose the
required programme number and if the word Dual
appears press OI/IIto select Dual 1, Dual 2 or Mono.
Stereo and Bilingual transmissions