10
English
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
Controls and Connections
4
Connect EITHER
S-Video OR
standard video
cable. Do not
connect both types
of video cable
at the same time.
S-Video device
connected to
VIDEO-1 IN
Component video DVD player
connected to
COLOR STREAM HD-1 IN*
Antenna, cable box,
or satellite dish
connected to
ANT IN
Audio system
connected to
AUDIO OUT
}HDMI or DVI device
connected to
HDMI IN*
Back panel connections
To view a source connected to one of the inputs on the back panel, press INPUT on the side panel to select the
applicable input: TV, AV1, S-Video, ColorStream HD-1, ColorStream HD-2, or HDMI.
Note:
• The TV’s INPUT key is on the side panel (not the front).
• For details on the video output requirements of your other devices, refer to the owner’s manuals for those devices.
• Cables are not supplied.
____________
* You can connect a component video-compatible device to either set of ColorStream® inputs
on the TV back panel—ColorStream HD-1 or ColorStream HD-2.
** For proper operation, it is recommended that you use as short an HDMI cable as possible (shorter than
16.4 ft (5m). HDMI cable transfers both video and audio; therefore, separate analog audio cables are
not required. Some CDVs (video CDs) may not output digital audio signals, in which case you may hear
sound by connecting analog audio cables. Connecting a DVI device requires an HDMI-to-DVI converter
cable and analog audio cables. Because this is an evolving technology, it is possible that some devices
may not operate properly with the TV.
+'0,WKH+'0,ORJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI+'0,/LFHQVLQJ//&