12
English
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
5Using the Remote Control

Button name Function

1. POWER Turns the TV ON and OFF.
2. LED Blinks when the remote control is sending a
signal to the TV or is being programmed.
3. SET Starts all programming sequences.
4. AUX Puts the remote control in AUXILIARY mode
(to operate a programmed device).
5. CBL Puts the remote control in CABLE mode
(to operate a programmed cable TV set-
top box) or SATELLITE mode (to operate a
programmed satellite TV set-top box).
6. TV Puts the remote control in TV mode
(preprogrammed to operate this TV).
7. VCR Puts the remote control in VCR mode (to
operate a programmed VCR).
8. Channel
Numbers Select a channel or input a password.
9. 100/ENT a. In TV mode, enters a channel number
greater than 100.
b. In other modes, functions as ENTER.
10. – /INPUT a. In TV mode, enters a decimal point for
DTV channel numbers.
b. In other modes, functions as INPUT.
11. VOL (+/–) Turns the volume up/down.
12. CH RTN Tunes the previously viewed channel.
(Will not switch between TV and DTV
channels).
13. CH (+/–) Changes the channel up/down.
14. MUTE Turns the sound ON and OFF.
15. INFO Displays the current video and audio source
(and channel number in TV mode).
16. MENU Opens the on-screen display (OSD) menus.
17. ENTER Selects options in the menus.
ŸźŻŹ Navigate the menus.
19. EXIT Closes a menu or program guide, or exits
the device.
20. GUIDE Turns the program guide ON and OFF in
DTV mode (see page 30).
21. MTS / Play a. In TV mode, toggles among STEREO,
SAP, and MONO audio.
b. In DTV mode, toggles among ENGLISH,
FRENCE, and SPANISH OSD languages.
c. In other modes, plays the CD player,
DVD player, or VCR.
Note :
If the remote control does not work, press the TV button
and try again.
Remote control functions