Toshiba 46HM95 - page 10

(E) 46/52/62HM95

___________

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

CableCARD™ is a trademark of Cable Television Laboratories, Inc.

TV back panel connections

For an explanation of cable types, see page 11.

1ANT-1 (CABLE) IN and ANT-2 IN — Two inputs that

support analog (NTSC) and digital (ATSC) off-air antenna

signals and analog and digital (QAM) Cable TV signals.

Note: If you have an antenna only, connect it to ANT-1. If you have

both cable TV and an antenna, connect the cable TV to ANT-1 and

the antenna to ANT-2.

2VIDEO 1 IN and VIDEO 2 IN — Two sets of standard

(composite) video and standard audio inputs plus optional

S-video inputs for connecting devices with composite video

or S-video output.

NOTE: Standard (composite) video and S-video cables carry

only video information; separate audio cables are required for a

complete connection.

3ColorStream

HD-1 and ColorStream

HD-2 — Two sets

of ColorStream

high-definition component video and

standard stereo audio inputs for connecting devices with

component video output, such as a Toshiba DVD player

with ColorStream

. See pages 15 and 17.

Note: Component video cables carry only video information;

separate audio cables are required for a complete connection.

4A/V OUT — Standard composite video and analog audio

outputs for connecting a VCR for editing and dubbing. See

page 18 for details.

5Variable Audio OUT — Standard analog audio outputs for

connecting an analog amplifier with external speakers. See

page 20.

6Digital Audio OUT — Optical audio output in Dolby

Digital or PCM (pulse-code modulation) format for

connecting an external Dolby Digital decoder, amplifier,

A/V receiver, or home theater system with optical audio

input. See page 20.

7G-LINK

— For use with one of the enclosed IR blaster/

G-LINK

cables to enable the TV Guide On Screen

recording features. See page 25.

8TheaterNet

™

(IR) OUT — For controlling infrared

remote-controlled devices through the TV. You can connect

up to two devices with either one of the enclosed IR blaster

cables, and then control the devices using the TV’s IR pass-

through or TheaterNet

™

(on-screen device control) features.

See pages 21 and 45.

9Standard Audio IN — For use when connecting a DVI

device with analog audio output to one of the HDMI

inputs. See page 19. Also see item 10 below.

0(2) HDMI

™

IN 1 and 2 — Two High-Definition

Multimedia Interface inputs receive digital audio and

uncompressed digital video from an HDMI device or

uncompressed digital video from a DVI device. See page 19.

NOTE: NEVER CONNECT THIS T V TO A PERSONAL

COMPUTER (PC). This TV is not intended for use with a PC.

!¡ (2) IEEE1394 — Two bi-directional digital IEEE1394

ports for connecting multiple devices with compressed

digital video. Because these ports are bi-directional, they can

be used for playback and recording. You can control your

IEEE1394 devices using the TV’s TheaterNet on-screen

device control icons. See pages 21–24 and 46.

NOTE:

•IEEE1394 cable carries both audio and video informat ion;

separate audio cables are not required.

• NEVER CON NECT THIS TV TO A PERSONAL

COMPUTER (PC). This TV is not intended for use with a PC.

!™ CableCARD

™

slot — For use with a digital security card

and digital cable TV service (provided by your local cable

operator) to view encrypted digital programming. See pages

12 and 51.

Chapter 2: Connecting your TV

OUT

{

}

23549

07 6!¡ !™

HM95_R2_009-11_061505 6/27/05, 6:44 PM10