Toshiba 46HM95 owner manual Adjusting the audio quality, Using the sub-bass system SBS

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1.Press MENU and open the Audio menu.

2.Highlight Audio Settings and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

Navigate Select CH RTN Back EXIT Exit

3.Press z to highlight the item you want to adjust (Bass, Treble, or Balance).

Audio Settings

Bass		100
Treble		100
Balance		0
SBS			On
SBS Level		85
StableSound			Off
	Reset		Done

4.Press x or • to adjust the level.

•x makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

•• makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

5.To save the new settings, highlight Done and press ENTER. To reset the settings to the factory defaults, highlight Reset and press ENTER.

Using the sub-bass system (SBS)

The sub-bass system allows you to enhance bass performance, even when the volume is low.

To turn on the SBS and adjust the level:

1.Press MENU and open the Audio menu.

2.Highlight Audio settings and press ENTER.

3.Press z to highlight SBS, and then press x or • to select On.

4.Press y or z to highlight SBS Level, and then press x or • to adjust the sub-bass system.

Audio Settings

Bass	100
Treble	100
Balance	0
SBS		On
SBS Level	85
StableSound		Off

5.To save the new settings, highlight Done and press ENTER. To reset the settings to the factory defaults, highlight Reset and pres ENTER.

To turn off the SBS:

Highlight Off in step 3.

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

1.Press MENU and open the Audio menu.

2.Highlight Audio Settings and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

Navigate Select CH RTN Back EXIT Exit

3.Press z to highlight StableSound, and then press x or • to select On.

Audio Settings

Bass		100
Treble		100
Balance		0
SBS			On
SBS Level		85
StableSound			Off
	Reset		Done

4.To save the new settings, highlight Done and press ENTER. To reset the settings to the factory defaults, highlight Reset and press ENTER.

Note: The RESET function returns your audio adjustments to the following factory settings:

Bass	center (50)
Treble	center (50)
Balance	center (0)
StableSound ...	Off

To turn off the StableSound® feature:

Select Off in step 3 above.

	Reset	Done
			Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	85
HM95_R2_079-86_061505		85	6/27/05, 5:12 PM

(E) 46/52/62HM95