Toshiba 42LZ196, 47LZ196 manual Turning off the built-in speakers, Control feature

To select the optical audio output format:

Chapter 5: Using the TV’s features

4 To save the new settings, highlight Done and press T.					3 In the Optical Output Format field, select either
To revert to the factory defaults, highlight Reset and						Dolby Digital or PCM, depending on your device.
press T.
							Audio Setup
Note: The RESET function returns your audio adjustments								MTS		Stereo
to the following factory settings:								Language		English
								Speakers		On
Bass . . . . . . . . . center (50)								Optical Output Format		Dolby Digital
Treble. . . . . . . . center (50)								Dolby Digital		Compressed
								Dynamic Range Control
Balance . . . . . . center (0)
									Reset	Done
StableSound. . . Off
					4 To save the new settings, highlight Done and press T.
To turn off the StableSound feature:						To revert to the factory defaults, highlight Reset and
Select Off in step 3 above.						press T.
Turning off the built-in speakers					Using the Dolby Digital Dynamic Range
You can use this feature to turn off the TV speakers when you					Control feature
connect an audio system to your TV (- “Connecting a digital					This dynamic range control feature causes the ATSC dynamic
audio system” and “Connecting an analog audio system” in the					range to be further compressed, allowing you to switch from
Installation Guide).					ATSC to analog broadcasts at the same dynamic range.
To turn off the built-in speakers:					To use the Dolby Digital Dynamic Range Control:
1 Press Yand open the Audio menu.					1 Press Yand open the Audio menu.
2 Highlight Audio Setup and press T.					2 Highlight Audio Setup and press T.
3 In the Speakers field, select Off.					3 In the Dolby Digital Dynamic Range Control field,
						select Compressed. When Standard is selected, the
	Audio Setup
						audio is output with minimal compression.
		MTS		Stereo
		Language		English
		Speakers		Off			Audio Setup
		Optical Output Format		Dolby Digital				MTS		Stereo
		Dolby Digital		Compressed				Language		English
		Dynamic Range Control						Speakers		Off
								Optical Output Format		Dolby Digital
			Reset	Done
								Dolby Digital
4 To save the new settings, highlight Done and press T.										Compressed
								Dynamic Range Control
To revert to the factory defaults, highlight Reset and									Reset	Done
press T.					4 To save the new settings, highlight Done						and press T.
To turn on the built-in speakers:						To revert to the factory defaults, highlight Reset and
						press T.
Select On in step 3 above.					Note:
Selecting the optical audio output format					•	This item will be grayed out for NTSC signals, Video,
						ColorStream, and PC inputs.
You can use this feature to select the optical audio output					•	The Dolby Digital Dynamic Range Control will function in
						relation to Optical Output Format.
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (- “Connecting a digital audio system” in the
Installation Guide).

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

45