Toshiba 47LZ196 Using the PC settings feature, Setting the PC Audio mode, To set the PC Audio

Chapter 5: Using the TV’s features

Using the PC settings feature

You can view the image from a PC on the TV screen. The PC must be connected to the TV’s PC IN terminals

(- Installation Guide).

The PC Settings feature allows you to make any necessary adjustments to the image.

If the edges of the image are not visible, you can adjust the Horizontal Position/Width and Vertical Position/ Height.

If the picture is affected by interference, you can adjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press +to select PC input mode

(- “Selecting the video input source to view” page 31).

2 Press Yand open the Setup menu.

3 Highlight PC Settings and press T.

Note: If a PC is not connected, this feature will be grayed out in the Setup menu.

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
PC Audio			No
HDMI 1 Audio			Auto
Slide Show Interval		2 Sec
Navigate ENTER	Select CH RTN Back EXIT Exit

4 Press B or b to highlight the item you want to adjust. 5 Press C or c to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Horizontal Width		0
Vertical Position		0
Vertical Height		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

•Horizontal Position:

Moves the picture left/right.

The adjustment range is within ±5 from center.*

•Vertical Position:

Moves the picture up/down.

The adjustment range is within ±5 from center.*

•Horizontal Width:

Adjusts the width of the picture.

The adjustment range is within ±5 from center.*

•Vertical Height:

Adjusts the height of the picture.

The adjustment range is within ±5 from center.*

•Clock Phase:

Helps to reduce noise and sharpen the picture. The adjustment range is within ±2 from center.*

•Sampling Clock:

Helps to reduce noise and minimize periodic vertical stripes on the screen.

The adjustment range is within ±15 from center.*

*The range of adjustment may vary slightly.

Setting the PC Audio mode

This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI (DVI) connection. (- Installation Guide)

To set the PC Audio:

1 Press Yand open the Setup menu.

2 Highlight PC Audio.

3 Press c and then press b to select No or Yes.

Yes: Outputs the sound from your PC.

No: Mutes the sound from your PC, and outputs the sound from the HDMI connection.

Setup

Installation			No
Sleep Timer			Yes
On/Off Timer
PC Settings
PC Audio		No
HDMI 1 Audio		Auto
Slide Show Interval		2 Sec
Navigate ENTER	Select CH RTN Back EXIT Exit

Note: Because the PC IN and HDMI (DVI) IN inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 9 and “Setting the HDMI™ audio mode” on page 28.)

52