Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.
Example: Adjusting the “GRAY LEVEL”
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “FUNCTION,” then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “GRAY LEVEL.”
F U N C T I O N
OSD | : | ON | |
OSD ADJ. | : | 1 | |
POWER MGT | : | OFF | |
|
| : | 3 |
GRAY LEVEL |
| ||
CINEMA MODE | : | ON | |
RGB3 ADJ. | : | 1 | |
LONG LIFE |
|
RESET |
|
SEL. | ADJ. EXIT RETURN |
3.To adjust the “GRAY LEVEL”...
Use the and buttons to adjust the GRAY LEVEL.
F U N C T I O N
OSD | : | ON | |
OSD ADJ. | : | 1 | |
POWER MGT | : | OFF | |
|
| : | 9 |
GRAY LEVEL |
| ||
CINEMA MODE | : | ON | |
RGB3 ADJ. | : | 1 | |
LONG LIFE |
|
RESET |
|
SEL. | ADJ. EXIT RETURN |
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once more.
Information
GRAY LEVEL
This adjusts the brightness of the black (the gray level) for the sides of the screen.
The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
Setting the picture to suit the movie
The film image is automatically detected and projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “FUNCTION,” then press the PROCEED button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select “CINEMA MODE.”
F U N C T I O N
OSD | : | ON |
OSD ADJ. | : | 1 |
POWER MGT | : | OFF |
GRAY LEVEL | : | 3 |
| : | ON |
CINEMA MODE | ||
RGB3 ADJ. | : | 1 |
LONG LIFE |
|
RESET |
|
SEL. | ADJ. EXIT RETURN |
3.To set the CINEMA MODE to “OFF” ...
Use the and buttons to select “OFF.”
The mode switches as follows each time the or button is pressed:
→ ON ↔ OFF ←
F U N C T I O N
OSD | : | ON |
OSD ADJ. | : | 1 |
POWER MGT | : | OFF |
GRAY LEVEL | : | 3 |
| : | OFF |
CINEMA MODE | ||
RGB3 ADJ. | : | 1 |
LONG LIFE |
|
RESET |
|
SEL. | ADJ. EXIT RETURN |
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once more.
Information
CINEMA MODE
ON | Automatic detection of the image and |
| projection in cinema mode. |
OFF | Cinema mode does not function. |
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
35
