Setting the color temperature
Use this procedure to set color tone produced by the plasma display.
Example: Setting “1” (See chart at right)
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “PICTURE,” then press the PROCEED button.
The “PICTURE” screen appears.
2.Use the ▲ and ▼ buttons to select “COLOR TEMP.”
P I C T U R E
CONTRAST |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BRIGHTNESS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
SHARPNESS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
COLOR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TINT |
|
| R |
|
|
|
| G |
|
|
|
|
|
| |||
|
|
|
|
|
| |||
PICTURE MODE | : | MEMORY | ||||||
| : | 2 |
|
|
|
| ||
COLOR TEMP. |
|
|
|
|
| |||
NR |
|
| : OFF | |||||
SEL. | ADJ. |
|
|
| RETURN | |||
|
| EXIT | ||||||
3. Use the and buttons to select “1.”
The mode switches as follows when the and buttons are pressed:
→ 2 ↔ 3 ↔ PRO ↔ 1 ←
• See page 27 to set “PRO.”
4.Once the setting is completed...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once more.
Information
Setting the color temperature
1 | High (bluer) |
2 | Middle (Standard) |
3 | Low (redder) |
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
COLOR TEMP. :
1
•If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.
26
