The 2nd line of the “WORKING TIME”:
→0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ←
The 1st line of the “WAITING TIME”:
→0H ↔ 1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ←
The 2nd line of the “WAITING TIME”:
→ 0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ←
6.Once the setting is completed...
Press the EXIT button several times to return to the main menu.
To close the main menu, press the EXIT button once more.
Information
Setting the time
WORKING TIME
Set the length of time the “INVERSE/WT” mode lasts. When the WORKING TIME is set to “ON,” the “INVERSE/WT” mode stays in the on state.
WAITING TIME
Set the length of time until the “INVERSE/WT” mode starts.
•The “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.
To select “ ON” for the “ WORKING TIME” ...
Set the hours of the WORKING TIME to 0H and the minutes to 0M. “ON” will be displayed.
Setting the time for “ SCREEN WIPER”
Set the “SCREEN WIPER” operation time, “WAITING TIME,” and “SPEED.”
Example: Setting so that the SCREEN WIPER mode starts in 30 minutes and proceeds for one and a half hours.
Perform Steps 1-2 on Page 36, then...
3.Use the ▲ and ▼ buttons to select “SCREEN WIPER,” then use the and buttons to select “ON.”
L O N G L I F E
PLE | : | AUTO |
ORBITER | : | OFF |
INVERSE | : | OFF |
| : | ON |
SCREEN WIPER |
SEL. PROCEED OK EXIT RETURN
4. Press the PROCEED button.
The “SCREEN WIPER” screen appears.
S C R E E N W I P E R
WORKING TIME |
| : | ON | |||
SPEED |
|
| : | 1 |
|
|
SEL. | ADJ. |
|
|
| RETURN | |
|
| EXIT | ||||
5.Adjust the time and speed using the and buttons and the ▲ and ▼ buttons.
The mode switches as follows each time the and button is pressed.
S C R E E N W I P E R
WORKING TIME |
| : | 1H | |||
|
|
| : | 30M | ||
WAITING TIME | : | 0H | ||||
|
|
| : | 30M | ||
SPEED |
|
| : | 1 |
|
|
SEL. | ADJ. |
|
|
| RETURN | |
|
| EXIT | ||||
The 1st line of the “WORKING TIME”:
→ ON or 0H ↔ 1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ←
•The “WORKING TIME” (minutes) and “WAITING TIME” cannot be set when the “WORKING TIME” is “ON.”
38
