Using the wired remote control mode, Approx | Toshiba 50HP82

Using the wired remote control mode

Connect the supplied remote cable to the remote controller’s remote jack and the “REMOTE CONTROL” terminal on the display.

When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote controller can be operated even if no batteries are loaded.

Operating Range

•Use the remote controller within a distance of about 23ft / 7 m. from the front of the display’s remote control sensor and at horizontal and vertical angles of up to approximately 30°.

•The remote control operation may not function if the display’s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote controller.

VIDEO 1	CONTROL
VIDEO 2	LOCK

	VIDEO 3	ON	/ OFF
1	L ( MONO )	ON	/ OFF
AUDIO	L ( MONO )
AUDIO	R
DVD1/HD1	Y
DVD1/HD1	CR / PR
	CB / PB
2	L ( MONO )	REMOTE
AUDIO	R	CONTROL
		CONTROL
	RGB 1
RGB2/DVD2/HD2	R / CR / PR	EXTERNAL
RGB2/DVD2/HD2	HD	EXTERNAL
	G / Y
	B / CB / PB
	VD	CONTROL

	3	L ( MONO )
	AUDIO	L ( MONO )
	AUDIO	R
		RGB 3
		( Digital RGB )
		CONTROL
		LOCK
		ON	/ OFF
	SPEAKERS MUST
	MORE THAN	REMOTE
	RATING	REMOTE
	6 OHM	CONTROL
	LEFT	EXTERNAL
		CONTROL

Remote Control

Cable

To Remote Jack

LUME			INPUT SELECT
UP	LEFT/–	RIGHT/+	/EXIT

Approx.

23ft / 7m

Handling the remote controller

•Do not drop or mishandle the remote controller.

•Do not get the remote controller wet. If the remote controller gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote controller for a long period, remove the batteries.

•Do not use new and old batteries together or use different types together.

•Do not take apart the batteries, heat them, or throw them into a fire.

•When using the remote controller in the wireless condition, be sure to unplug the remote cable from the REMOTE CONTROL terminal on the display.

11

Image 11

Toshiba 50HP82 owner manual Using the wired remote control mode, Operating Range, Handling the remote controller, Approx

Contents

50HP82 Important Information Precautions Recommendations to avoid or minimize phosphor burn-in To avoid damage and prolong operating life Contents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma Display Introduction to the 50HP82 Plasma Display Features you’ll enjoy includeContents of the Package Introduction Front View Part Names and Function DVD1 / HD1 Rear View/ Terminal BoardEXT Speaker L and R VIDEO1, 2 Remote Controller 9Remote Jack Battery Installation and Replacement8Remote control signal transmitter Approx Using the wired remote control modeHandling the remote controller Operating Range Personal computer with a digital RGB output Installation Connections with Equipment that has a Digital Interface Connecting Your PCConnecting Your VCR Connecting Your DVD Player Right Left External Speaker Connections Pin No Signal Analog Pin Assignments and Signal Levels for 15-pin RGB Analog Basic Operations → 30 → 60 → 90 → 120 → To set the off timerTo cancel the off timer To check the remaining time Watching with a wide screen manual When watching VCR’s or DVDWhen watching high definition video source Wide Operations Watching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size setting Side-by-side Operations in the Side-by-side modeMulti Window Operations Showing two pictures on the screen at the same time To change the size of the sub screen, press the Zoom Button Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSD controls Menu Operations OSDOn Screen Display Controls Main menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screen Types of picture modes Example Setting the Theater modeTo set to Theater Setting the color temperature Setting the color temperatureExample Setting 1 See chart at right Once the setting is completed Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Adjust the white balance using the and buttons Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bass When Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal mode Adjusting the position of the image Function Settings MenuSetting the on-screen display Adjusting the Auto Picture Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the position Power management settings Setting the power management for computer imagesExample Turning the power management function on Power management function Horizontal and vertical synchronizing Picture already on POWER/STANDBY indicatorDescription Turning the picture back on Green Example Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray Level Example Setting PLE to Lock Setting RGB3 ADJExample Setting When you adjust the RGB3 ADJ Perform Steps 1-2 on Page 36, then Setting the time for Inverse To select on for the Working Time Setting the time for Screen Wiper Setting the time To select on for Working Time Resetting to the default valuesSet the length of time until the Screen Wiper mode starts Example Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectors See page 45 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to Motion HD Select modes Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Language settings To select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Video signal formats Frequency Table of Signals SupportedSupported resolution Computer input signals supported by this systemPage Symptom Checks Remedy Troubleshooting Specifications FCC Statement MODEL50HP82 For additional information, visit TACP’s web site How to Obtain Warranty ServicesCommercial Units Your Responsibility For additional information, visit TCL’s web site Limited One 1 Year Warranty on Parts and Labor 02-06 7S800701