4. With the help of a second person, raise the

4

Wire Tie

 

 

 

 

Handrails (80, 81) so the Base (87) is flat on the

 

 

 

 

floor as shown. Next, position the front of the

 

 

 

 

 

 

treadmill Frame (59) between the Handrails.

 

 

 

 

 

 

See the inset drawing. Locate the wire tie in-

 

 

 

 

 

 

side of the lower end of the Right Handrail (81).

 

 

 

 

 

 

Secure the wire tie to the Wire Harness (83).

 

 

 

 

 

 

Then, pull the upper end of the wire tie until the

 

 

 

 

 

 

end of the Wire Harness is extending from the

80

 

 

81

 

 

hole in the upper end of the Right Handrail.

 

 

 

 

Attach a Wheel (85) to the Base (87) with an M10

 

 

 

 

 

 

x 80mm Bolt (5) and an M10 Jam Nut (14).

 

 

 

14

85

 

Attach the other Wheel (not shown) in the

 

59

83

 

same way.

 

 

5

 

 

 

 

 

87

 

 

 

 

 

 

 

 

 

 

83

Wire

81

 

 

 

Tie

5.Have a second person lift and hold the front end of the Frame (59). Hold a Frame Spacer (84) be- tween the Right Handrail (81) and the Frame.

Attach the Right Handrail to the Frame with an M10 x 110mm Bolt (3), an M10 Washer (12), and an M10 Star Washer (10). Do not tighten the

Bolt yet.

Repeat this step on the left side of the tread- mill.

5

 

 

81

84

 

 

 

10

12

3

 

59

 

 

8

Page 8
Image 8
Weslo WLTL24308.0 user manual See the inset drawing. Locate the wire tie, Attach the other Wheel not shown Same way