PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a
b. If the walking belt is overtightened, treadmill perfor- b mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few min- utes. Repeat until the walking belt is properly tight- ened.
c.If the walking belt still slows when walked on, see the front cover of this manual.
PROBLEM: The walking belt is
SOLUTION: a. If the walking belt has shifted to the left, first re- |
|
|
|
|
|
| |
move the key and UNPLUG THE POWER CORD. |
| a |
|
Using the hex key, turn the left idler roller bolt clock- |
|
|
|
|
|
| |
wise 1/2 of a turn. Be careful not to overtighten the |
|
|
|
walking belt. If the walking belt has shifted to the |
|
|
|
right, turn the left idler roller bolt counterclockwise 1/2 |
|
|
|
of a turn. Then, plug in the power cord, insert the key, |
|
|
|
and run the treadmill for a few minutes. Repeat until |
|
|
|
the walking belt is centered. |
|
|
|
SOLUTION: a. If the walking belt slips when walked on, first remove |
|
|
|
| a |
| |
the key and UNPLUG THE POWER CORD. Using |
|
| |
the hex key, turn both idler roller bolts clockwise, 1/4 |
|
|
|
of a turn. When the walking belt is correctly tightened, |
|
|
|
you should be able to lift each edge of the walking |
|
|
|
belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be |
|
|
|
careful to keep the walking belt centered. Then, plug |
|
|
|
in the power cord, insert the key, and carefully walk |
|
|
|
on the treadmill for a few minutes. Repeat until the |
|
|
|
walking belt is properly tightened. |
|
|
|
17
