9.Attach the Latch Housing (82) to the Left Handrail (80) with two M4.2 x 16mm Screws (2).
Make sure that the Latch Housing is oriented as shown.
10.Attach the Incline Legs (63) to the Frame (59) with two M8 x 52mm Bolts (1), four M8 Washers (11), and two M8 Jam Nuts (13).
9
80 2
82
10
| 59 | 11 | 13 |
| 1 | |
1 | 11 63 | 11 63 | ||||
|
| 11 | ||||
|
|
|
11.Insert the Incline Pins (62) at the desired incline level (see HOW TO CHANGE THE INCLINE OF THE TREADMILL on page 14).
11 |
62 |
62 |
12.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
10
