Toshiba 62HMX95 Blocking channels, Unlocking programs temporarily, Using the input lock feature

Enter PIN code to temporaily un-

block.

* * * *

Chapter 9: Using the Locks menu

Blocking channels

With the Channels Block feature, you can block specific channels. You will not be able to tune blocked channels unless you clear the setting first.

To block channels:

1.Press MENU and highlight the Locks menu icon.

2.Press z to display the

PIN code entering
screen.	Locks
	Enable Rating Blocking	Off
3. Enter your four-digit	Edit Rating Limits
	Channels Block
PIN code and press	Input Lock	Off
ENTER (see page 97 for	Front Panel Lock	Off
	Game Timer	Off
details).	New PIN Code
4. Press z to highlight	Navigate Select	CH RTN Back EXIT Exit
Channels Block and then press ENTER.

5.Using the yz x • buttons, select the input for which you want to change the rating limits (ANT1, ANT2, or Cable Box, if connected) and press ENTER.

A list of the channels available for that input will be displayed along with the call letters for each channel, if available.

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and the following message will appear on-screen:

You can either temporarily unlock the program or select an unlocked program to watch.

To temporarily unlock the program:

1. Press MUTE. Locks Active

2. Enter your four-digit PIN code and press ENTER. If the correct

code is entered, theCancel Done program lock mode is

released and the normal picture appears. All locking is disabled until the TV is turned off, and will be enabled when the TV is turned on again.

Using the input lock feature

6.Press yz to highlight the channel you want to block, then press ENTER, which puts an “⋅” in the box next to that channel.

7.Repeat step 6 for other channels you want to block.

Channels Block

1

2

3

4

5

6

7

8

9

10

ANT 1

ANT 1

ANT 2

Cable Box

Allow All

Block All

Cancel

Done

You can use the Input Lock feature to lock the video inputs (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD-1, ColorStream HD-2, HDMI 1, HDMI 2, and PC) and channels 3 and 4. You will not be able to view the input sources or channels until you unlock the inputs.

To lock/unlock the video inputs:

1. Press MENU and highlight the Locks menu

8. Highlight Done and press ENTER.

To unblock individual channels:

In step 6 above, press yz to highlight the channel you want to unblock, and then press ENTER to remove the “X” from the box, and then highlight Done and press ENTER.

To block all channels at once:

Highlight Block All in step 6 above, and then highlight Done, and press ENTER.

icon.Locks

2.	Press z to display the	Enable Rating Blocking	Off	Off
		Edit Rating Limits		Video
	PIN code entering screen.	Channels Block		Video +
		Input Lock	Off
3.	Enter your four-digit PIN	Front Panel Lock	Off
		Game Timer	Off
	code and press ENTER.
		New PIN Code
4.	Press z to highlight Input
		Navigate Select	CH RTN Back	EXIT Exit

Lock and press •.

5. Press y or z to select the level of video input locking you

prefer, as described below.

To unblock all locked channels at once:

Highlight Allow All in step 6	Channels Block
above, and then highlight
		1

Done and press ENTER.	2
	3
	4
	5
	6
	7
	8
	9
	10

ANT 1

ANT 1

ANT 2

Cable Box

Allow All

Block All

Cancel

Done

6. Press ENTER.

Video: Locks VIDEO 1, VIDEO 2, VIDEO 3,

ColorStream HD1, ColorStream HD2, HDMI 1,

HDMI 2, and PC.

Video+: Locks VIDEO 1, VIDEO 2, VIDEO 3,

ColorStream HD1, ColorStream HD2, HDMI 1,

HDMI 2, PC, and channels 3 and 4.

• Make sure the POP window is not on channel 3 or 4.

• Select Video+ if you play video tapes via an ANT input.

• When a CableCARD™ is inserted, Video+ will not lock

Note: Channel blocking may not take effect if you have a cable box connected and use the cable box controls to change channels.

channels 3 and 4.

Off: Unlocks all video inputs and channels 3 and 4.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 99

(E) 52/62HMX95