Toshiba 52HMX95 Setting up and using TheaterNetª on-screen device control, Setting up TheaterNet

Chapter 6: Setting up your TV

Setting up and using TheaterNetª on-screen device control

The TheaterNet feature allows you to control many brands of IEEE1394 and/or infrared remote-controlled A/V devices through your TV using on-screen control icons and the TV’s remote control.

Note:

•Although the TheaterNet on-screen device control feature includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TheaterNet feature to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

•For IR pass-through device control information, see “Connecting a device to the TheaterNet OUT infrared terminal” on page 22.

Setting up TheaterNet

All device types except IEEE1394 require the following setup process before you can control them using the TheaterNet on-screen icons.

All compatible IEEE1394 devices are automatically recognized by the TheaterNet feature and do not require setup.

Note: See page 25 for details about the IEEE1394 ports. If your IEEE1394 device is not recognized through the IEEE1394 port or through the TheaterNet feature, it may be possible to set it up for IR pass-through control as an infrared device (see page 22).

To set up TheaterNet device control:

1.Make sure you have properly connected your infrared remote-controlled device(s). See pages 22 and 25 for details.

2.Press MENU and open the Setup menu.

3.Highlight Installation and press ENTER.

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI 1 Audio		Auto
HDMI 2 Audio		Auto
Slide Show Interval		2 Sec
Navigate	Select CH RTN Back EXIT Exit

4.A new set of Installation menu icons will appear on-screen, as shown below. Open the Devices menu, highlight TheaterNet Devices, and then press ENTER.

Devices

IEEE1394 Devices

TheaterNet Devices

5. The TheaterNet Setup menu opens.

TheaterNet Setup

Input					Video 1		Select device
Type					Cable		type, brand,
							and IR code
Brand			General Instrum...
							from owners
IR List		0000					manual.
IR Code		0	0	0	0	Test
	Reset					Done

Using the x • buttons, select the Input the device is connected to.

Note: When the input is changed, all unsaved settings will be lost.

6.Press z and then x • to select the device Type.

7.Press z and then x • to select the device Brand.

Note: When selecting a new brand, the IR code will be set to 0.

8.Press z and then x • to select the device’s IR List.

9.If the desired IR code is found, skip to step 10.

If the desired IR code is not in the list, press z and use the Channel Number buttons to enter the device IR code.

Note: You can find the IR code for your device in the on-screen list or in the TheaterNet device code table on pages 52–54.

10.Highlight Test and press ENTER to test whether the device responds to the code. If the device does not respond to the code, repeat steps 8 and 9 using another code for the same device.

When done, highlight Done and press ENTER or choose a different Input for which to set up TheaterNet device control.

To remove a device from TheaterNet:

1.Follow steps 1–5 above.

2.Highlight Reset and press ENTER.

Navigate Select CH RTN Back EXIT Exit

50 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

(E) 52/62HMX95