Toshiba 56MX195 Adjusting the audio, Muting the sound, Selecting stereo/SAP broadcasts

Chapter 8: Using the TV’s features

Adjusting the audio

Muting the sound

Press MUTE to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press MUTE, the mute mode will change in the following order.

→ 1/2 Mute → Mute → Volume →

If the closed caption mode is set to Off when you select ÒMUTEÓ mode, the closed caption feature is automatically activated. To mute the audio without automatically activating the closed caption feature, use the VOL z button to set the volume to 0. See ÒUsing the closed caption modeÓ on page 82

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

The MTS feature is not available when the TV is in VIDEO mode. When the TV receives a stereo or SAP broadcast, the word ÒSTEREOÓ or ÒSAPÓ appears on-screen when RECALL is pressed.

for more information on closed caption modes.

VOL z

RECALL

MUTE

Using the digital audio selector

To listen to stereo sound:

1.Press MENU and open the Audio menu.

2.Highlight Audio Setup and press ENTER.

3.In the MTS field, select Stereo.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

Audio Setup

MTS	Stereo
Language	English
Speakers	On
Optical Output Format	Dolby Digital

You can use the Digital CC/Audio selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup.

1. Press MENU and open the Applications menu.

ResetDone

4.To save the new settings, highlight Done and press ENTER. To reset the settings to the factory defaults, highlight Reset and press ENTER.

Note:

¥ You can leave the TV in Stereo mode because it automatically

outputs the type of sound being broadcast (stereo or monaural).

2.Highlight Digital CC/ Audio Selector and press

ENTER.

3.Press y or z to select Audio, and then press x or • to select the desired service.

Applications

TV Guide On Screen

Audio Player

Picture Viewer

Digital CC/Audio Selector

CableCARD

Navigate Select CH RTN Back EXIT Exit

¥ If the stereo sound is noisy, select MONO to reduce the noise.

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 3 above, and then press x or • to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Audio	CC 1
Closed Caption	Service 1

Select SAP in step 3 above.

Note:

¥A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the programÕs normal audio.

¥If you have SAP on and the station you are watching is not broadcasting a second audio program, the stationÕs normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

90 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.