Toshiba 72MX195, 62MX195 owner manual Using the PC setting feature

Chapter 8: Using the TV’s features

Using the PC setting feature

You can adjust the horizontal position/size, vertical position/size, clock phase, and sampling clock. This feature will be grayed out on the menu unless there is a PC connected to the TV (See ÒConnecting a personal computer (PC)Ó on page 29.)

To set the PC setting:

1.Confirm a PC is connected (see ÒConnecting a personal computer (PC)Ó on page 29).

2.Repeatedly press INPUT to select PC input mode. (See Selecting the video input source to view Ó on page 72.)

3.Press MENU and open the Setup menu.

4.Highlight PC Settings and press ENTER.

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI 1 Audio		Auto
HDMI 2 Audio		Auto
Slide Show Interval		2 Sec
Navigate	Select CH RTN Back EXIT Exit

5.Press y or z to highlight the item you want to adjust.

6.Press x or • to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Horizontal Width		0
Vertical Position		0
Vertical Height		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

¥Horizontal Position/Vertical Position:

Adjusts picture left/right and up/down. The adjustment range is within ±5 from center.

(The adjustable range may vary depending on the input mode.)

¥Horizontal Width/Vertical Hegiht:

Adjusts picture width of Horizontal and picture height of Vertical. The adjustment range is within ±5 from center.

¥Clock Phase:

This function is to reduce noise and sharpen the picture. The adjustment range is within ±15 from center.

¥Sampling Clock:

This function is to minimize periodic vertical stripes on the screen.

The adjustment range is within ±15 from center.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 95

Downloaded from www.Manualslib.com manuals search engine