Toshiba 62MX195, 72MX195 owner manual Tuning channels Tuning your favorite channels, Channel Return

Chapter 8: Using the TV’s features

Tuning channels (continued)

Tuning your favorite channels		Switching between two channels using
To tune to the channels you programmed as Favorite Channels,		Channel Return
see page 44.		The Channel Return feature allows you to switch between two
		channels without entering an actual channel number each time.
Tuning to the next programmed channel		1. Select the first channel you want to view.
To tune to the next programmed channel:		2. Select a second channel using the Channel Number buttons
		(and the dash (Ð) button if selecting a digital channel).
Press CHANNEL y or z on the remote control or TV control
		3. Press CH RTN on the remote control. The previous
panel.
		channel will display. Each time you press CH RTN, the TV
Note:
		will switch back and forth between the last two channels
¥	This feature will not work unless you program channels into the	that were selected.
	TVÕs channel memory (see page 42).	Note: If you press CH RTN from a non-antenna input, the TV
¥	If you are recording a digital channel, you will only be able to	will return to the last-viewed ANT input and channel. If you
	change analog channels while the recording is in progress. If you	are currently recording a program, this feature will not be
	are recording an analog channel, you will only be able to change	available.
	digital channels while the recording is in progress. This is
	because the TV tuner that is being recorded (digital or analog)	Switching between two channels using
	will be locked on the channel that is currently recording.
Tuning to a specific channel		SurfLockª
		The SurfLockª feature temporarily ÒmemorizesÓ one channel
(programmed or unprogrammed)		in the CH RTN button, so you can return to that channel
Tuning analog channels:		quickly from any other channel by pressing CH RTN. To
		memorize a channel in the CH RTN button:
Press the Channel Number buttons (0Ð9) on the remote		1. Select the channel you want to program into the CH RTN
control. For example, to select channel 125, press 1, 2, 5.		button.
Tuning digital channels:		2. Press and hold CH RTN for about 2 seconds until the
Press the Channel Number buttons (0Ð9) on the remote		message ÒChannel MemorizedÓ appears on the screen. The
		channel has been programmed into the CH RTN button.
control, followed by the Ð (dash) button and then the sub-
		3. You can then change channels repeatedly, and when you
channel number. For example, to select digital channel 125-1,
press 1, 2, 5, Ð, 1.		press CH RTN, the memorized channel will be selected.
	Note: If a digital channel is not programmedÑeither through
	the automatic channel scan (page 42) or the channel add/	The TV will return to the memorized channel one time only.
	delete function (page 43)Ñyou will have to tune the RF
		Once you press CH RTN and then change channels again, the
	channel using the Channel Number and Dash buttons on the
		CH RTN memory will be cleared and the button will function
	remote control.
		as Channel Return, by switching back and forth between the last
		two channels that were selected.
			Channel Numbers
			Ñ (dash)

CHANNEL yz

CH RTN

76 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Downloaded from www.Manualslib.com manuals search engine